SS bag 50 Micron water filter housing with mesh basket
Bag filters is to remove suspended particulate from water and other process liquids. Contaminants such as pipe scale, grit, wax, metal chips, rust, and airborne debris are found in a broad range of particle sizes. PEP offers a variety of bags to capture particles ranging from 0.35 to 800 microns.
These multi basket strainers and bag filters offer a wide range of flow capacities and contaminant-holding capabilities. They contain from 2 to 23 baskets.
To serve as a strainer, a unit is ordered with perforated stainless steel baskets (mesh-lined if desired). When ordered as a filter, it’s fitted with perforated stainless steel baskets designed to hold disposable or cleanable filter bags. Industry-standard size bags are used: the standard 30 inch baskets accept bag size 2, the optional 15 inch baskets take size 1.
Main advantages
01. Small probability for side-bag leakage , which effectively guarantee the filtering quality.
02. Bag type filter can bear greater working pressure, it is of small pressure loss,low operation cost and obvious energy saving .
03. Accuracy of filtration bag increased continuously, it could reach 0.5 μm at most.
04. Bag type filter large handling capacity, small volume, containing a large quantity of pollutants.
05.Based on the working principle and structure of Bag type filtering system,which is convenient to replace the filter bag and without cleaning,and time saving and labor saving.
06. Filtration bag could be use repeated after cleaning to save cost.
07. bag filter application scope is broad, with flexible operation and multiple installation .
| Technical parameters | Design pressure: 0.96MPa 30min |
| Maximum working pressure:0.60MPa |
| Surface smoothness:Ra≤0.2 |
| Design flow rate:Ra≤0.2 |
| Inlet&outlet type thread or flange |
| Type:single bag & multi bag filter housing |
| Designed for bag filtration system | Different kinds of bag support baskets to fit for |
| wide range of filter bags |
| Complete stainless steel structure | Made of 100% SUS304, SUS316L, PP |
| Easy to clean | Surface is mechanical polished or sand blasting passivation. |
| dished end to aid clean down |
Specifications for single bag filter housing
| No. | Size | Diameter | Length | inlet&outlet | Filter bag | Flow rate |
| Code | (mm) | (mm) | size | (m/h) |
| 1 | BJD1 | 220 | 550 | 2" thread, clamp, flange | 1 | 20 |
| 2 | BJD2 | 220 | 950 | 2" thread, clamp, flange | 2 | 40 |
| 3 | BJD4 | 130 | 650 | 1" thread, clamp, flange | 4 | 10 |
Specifications for multi bag filter housing
| No. | Size | Diameter | Length | inlet&outlet | Filter bag | Flow rate |
| Code | (mm) | (mm) | size | (m/h) |
| 1 | BJD2-2 | 400 | 1600 | 3" thread, clamp, flange | 2*2 | 80 |
| 2 | BJD2-3 | 500 | 1600 | 3" thread, clamp, flange | 2*3 | 120 |
| 3 | BJD2-4 | 550 | 1600 | 4" clamp, flange | 2*4 | 160 |
| 4 | BJD2-5 | 600 | 1600 | 4" clamp, flange | 2*% | 200 |
Ordering Guide
| PRODUCT | Bag Size | Bag Q'ty | Inlet/Outlet | Connection | Surface | Materials |
| BJD | 1 -#1 bag | 01 - Single | A- side in and side out | K-coupling | S- sand blasting | 304 |
| | 2 - #2 bag | 02 - Two | B- side in and bottom out | F-bolt | T- polished | 316L |
| | 3 - #3 bag | 03 - Three | C- bottom in and bottom out | S- thread | | PP |
| | 4 - #4 bag | 04 - Four | D- top in and bottom out | How to order ?-example |
| | 5 - #5 bag | 06 - Six | | Bag size: #1; Bag Q'ty: Single |
| | 6 - #6 bag | 08 - Eight | | Inlet/outlet: side in and side out |
| | 7 - #7 bag | 12 - Twelve | | | Connection: coupling |
| | X - other size | | | | Surface: sand blasting |
| | | | | | Material: SUS304 |
| | | | | |
Product Tags:
|
|
50 Micron Water Filter Housing Stainless Steel Bag Filter Housing With Mesh Basket Images
|
